The Android system has great advantages for users, since this operating system is always open for changes and improvements. The best part is that you can easily configure and optimize the performance of your Android device to increase speed, increase battery life or even replace standard software with regular or unofficial software. But for this you must first perform additional operations that will provide access to the internal system of the smartphone or tablet. As you will see, for each task you will need to use the image to restore; so in this guide we will tell you how easy it is to manually enter recovery mode on root and non-rooted Android phones.
On all Android-smartphones and tablets, there are spare images pre-installed on their systems. Inventory recovery can be used for numerous operations, such as installing applications from SD cards, backing up data, performing maintenance procedures, etc. But when it comes to unofficial methods such as installing a custom firmware or kernel, restoring the stock is useless . In this case, you must replace the restore of the stock with a custom restore, an operation that normally requires root access (although not always).
User recovery samples have excellent features and options that can be used by Android users who are trying to set up their phones. Therefore, these tools are useful only if you want to perform complex operations on your phone / tablet; otherwise, replacing the original recovery image with a custom image does not make sense. As mentioned, user recovery should be used when attempting to upgrade to beta, unofficial or custom firmware, or when installing custom kernels, and then you can speed up / slow down the frequency of the smartphone or tablet processor to increase speed or update battery life.
The most used user images for recovery for Android are CWM and TWRP, the latest of which is the tactile version of the first tool. There are many other recovery applications that can be installed on the Android system, but we recommend using the above tools.
As mentioned earlier, when you try to install a custom restore, you may need to access the root. In this case, you must first unlock your smartphone / tablet (get root), then install the application and finally come back here and learn how to download the Android device in recovery mode. Keep in mind that when you call, the warranty is canceled and to restore the original status, you must go back to the firmware or update the official version of the Android software.
This guide is suitable for both ruled and locked smartphones and tablets for android, which means that you can find out how to enter recovery mode without problems. This method will work on almost all android-devices, so this is a universal guide. So, whether you need to go into the recovery store or a custom restore (CWM or TWRP), use our instructions and find out how.
Typically, to enter the recovery mode, you must press a combination of buttons on the phone. First, you need to turn off the device, wait a few seconds, and then press the power button and adjust the volume up simultaneously for a few seconds. After this, the recovery mode should be displayed. If this does not work for you, follow the instructions below.
Enter recovery mode on rooted android devices
- This method is easy. It consists of a small number of steps. Download the Quick Boot application.
- Install this app on your phone or tablet.
- Launch the application.
- In the menu you will see the following items: Recovery, Reboot, Bootloader and Power Off. Select Recovery.
- Your device will now reboot in recovery mode.
Enter recovery mode on non-rooted android devices
- To successfully complete these steps, you will need access to a computer or laptop.
- You will also need a USB cable.
- The phone must be enabled for debugging via USB.
- The computer should have an Android SDK.
- Connect the phone to the computer using the USB cable.
- On the computer, locate the Fastboot folder.
- Open a command prompt.
- At the command prompt, type “adb reboot recovery”.
- After that, the phone will go into recovery mode.
Excellent, our training is complete. Now you know how to enter recovery mode on ruled and locked android-devices. Now move forward and use the recovery menu to create Nandroid backups , to install custom firmware or to perform other complex and powerful operations.